Removal and Installation: Removal

WARNING: This page is about a different car, the 2019 Nissan NV3500 HD and 2019 Nissan NV2500 HD. However, it is still accessible from the selected car via links, so may be relevant.

Drain engine coolant. Refer to Changing Engine Coolant .
Remove front under cover. Refer to Removal and Installation .
Disconnect water hoses from oil cooler.
CAUTION: Perform this step when engine is cold.

NOTE: When removing components such as hoses, tubes/lines, etc., cap or plug openings to prevent fluid from spilling.
Remove oil filter. Refer to Removal and Installation .
Loosen oil cooler bolts in the reverse of the sequence shown below and remove oil cooler.

Courtesy of NISSAN NORTH AMERICA, INC.

NOTE: When loosening, disregard number 5.