Component Inspection (VVEL ACTUATOR HOUSING ASSEMBLY)
WARNING: This page is about a different car, the 2019 Nissan NV3500 HD and 2019 Nissan NV2500 HD. However, it is still accessible from the selected car via links, so may be relevant.
- CHECK VVEL ACTUATOR HOUSING ASSEMBLY
- Turn ignition switch OFF.
- Remove VVEL actuator housing assembly. Refer to Removal and Installation .
- Turn the ball screw shaft to check that it works smoothly.
Is the inspection result normal?
YES
INSPECTION END
NO
GO TO 2.
- REPLACE VVEL ACTUATOR HOUSING ASSEMBLY
Replace VVEL actuator housing assembly. Refer to Removal and Installation .
INSPECTION END