Component Function Check
WARNING: This page is about a different car, the 2019 Nissan NV3500 HD and 2019 Nissan NV2500 HD. However, it is still accessible from the selected car via links, so may be relevant.
- PERFORM COMPONENT FUNCTION CHECK
WITH GST
- Turn ignition switch ON.
- Check the voltage between ECM harness connector terminals under the following conditions.
ECM
Condition
Voltage (V)
+
-
Connector
Terminal
Connector
Terminal
F79
62
E77
152
Selector lever
P or N position
Battery voltage
Except above position
Approx. 0
Is the inspection result normal?
YES
INSPECTION END
NO
Go to Diagnosis Procedure .