LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> NV2500 HD S >> Repair and Diagnosis >> External Pages >> Different car >> Section 493 (Engine Control System (VK56VD) DTC/Circuit Diagnosis (4 Of 6)) >> DTC/Circuit Diagnosis >> DTC P062F: Control Module >> DTC Confirmation Procedure

DTC Confirmation Procedure

WARNING: This page is about a different car, the 2019 Nissan NV3500 HD and 2019 Nissan NV2500 HD. However, it is still accessible from the selected car via links, so may be relevant.
  1. PRECONDITIONING 

    If DTC Confirmation Procedure is previously conducted, always turn ignition switch OFF and wait at least 30 seconds before conducting the next test.

    GO TO 2.

  2. PERFORM DTC CONFIRMATION PROCEDURE 
    1. Turn ignition switch ON and wait at least 10 seconds.
    2. Check the DTC.

    Is the DTC detected?

    YES

    To check malfunction symptom before repair: Refer to Intermittent Incident .

    YES

    Confirmation after repair: INSPECTION END

    NO

    Proceed to Diagnosis Procedure .