Data Monitor

WARNING: This page is about a different car, the 2019 Nissan NV3500 HD, 2019 Nissan NV2500 HD, and 2019 Nissan NV1500. However, it is still accessible from the selected car via links, so may be relevant.

Monitor Item [Unit]	Main Signals	Description
MOTOR FAN REQ [1/2/3/4]	x	Indicates cooling fan speed signal received from ECM on CAN communication line
AC COMP REQ [On/Off]	x	Indicates A/C compressor request signal received from ECM on CAN communication line
TAIL&CLR REQ [On/Off]	x	Indicates position light request signal received from BCM on CAN communication line
HL LO REQ [On/Off]	x	Indicates low beam request signal received from BCM on CAN communication line
HL HI REQ [On/Off]	x	Indicates high beam request signal received from BCM on CAN communication line
FR FOG REQ [On/Off]	x	Indicates fog lamp request signal received from BCM on CAN communication line
FR WIP REQ [Stop/1LOW/Low/Hi]	x	Indicates front wiper request signal received from BCM on CAN communication line
WIP AUTO STOP [STOP P/ACT P]	x	Indicates condition of front wiper auto stop signal
WIP PROT [Off/BLOCK]	x	Indicates condition of front wiper fail-safe operation
ST RLY REQ [On/Off]	Indicates starter request signal received from ECM on CAN communication line
IGN RLY [On/Off]	x	Indicates condition of ignition relay
RR DEF REQ [On/Off]	x	Indicates rear defogger request signal received from BCM on CAN communication line
OIL P SW [Open/Close]	Indicates condition of oil pressure switch
DTRL REQ [On/Off]	Indicates daytime running light request signal received from BCM on CAN communication line
THFT HRN REQ [On/Off]	Indicates theft warning horn request signal received from BCM on CAN communication line
HORN CHIRP [On/Off]	Indicates horn reminder signal received from BCM on CAN communication line