Component Inspection (VVEL Actuator Motor Relay)
WARNING: This page is about a different car, the 2019 Nissan NV3500 HD and 2019 Nissan NV2500 HD. However, it is still accessible from the selected car via links, so may be relevant.
- CHECK VVEL ACTUATOR MOTOR RELAY
- Turn ignition switch OFF.
- Remove VVEL actuator motor relay.
- Check the continuity between VVEL actuator motor relay terminals under the following conditions.
Terminal
Condition
Continuity
3 and 5
12V direct current supply between terminals 1 and 2
Existed
No current supply
Not existed
Is the inspection result normal?
YES
INSPECTION END
NO
Replace VVEL actuator motor relay.