Connecting Rod Bolt Outer Diameter
WARNING: This page is about a different car, the 2019 Nissan NV3500 HD and 2019 Nissan NV2500 HD. However, it is still accessible from the selected car via links, so may be relevant.
- Measure the outer diameters [(a), (b) and (c)] at the position shown in the figure.
(A)
: Value at the end of the smaller diameter of the bolt
(B)
: Value at the end of the smaller diameter of the bolt [opposite side of (a)]
(C)
: Value of the smallest diameter of the smaller of the bolt
- Obtain a mean value (d) of (a) and (b).
- Subtract (c) from (d).
Limit [(d) - (c)]
: 0.09 mm (0.0035 in)
- If it exceeds the limit (large difference in dimensions), replace the bolt with new one.