Connecting Rod Big End Diameter

WARNING: This page is about a different car, the 2019 Nissan NV3500 HD and 2019 Nissan NV2500 HD. However, it is still accessible from the selected car via links, so may be relevant.

Install connecting rod bearing cap without installing connecting rod bearing, and tighten connecting rod bolts to the specified torque. Refer to Disassembly and Assembly for the tightening procedure.

Courtesy of NISSAN NORTH AMERICA, INC.

(1)

: Connecting rod

Measure the inner diameter of connecting rod big end with a suitable tool.

Standard

: Refer to Cylinder Block .

If out of the standard, replace connecting rod assembly.