LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> NV2500 HD S >> Repair and Diagnosis >> External Pages >> Different car >> Section 488 (Engine Mechanical (5.6L)) >> Removal And Installation >> Ignition Coil >> Removal and Installation >> Removal

Removal and Installation: Removal

WARNING: This page is about a different car, the 2019 Nissan NV3500 HD and 2019 Nissan NV2500 HD. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect harness connector from ignition coil.
  2. Remove ignition coil.
    CAUTION: Do not shock ignition coil.
    NOTE: Installation position of ignition coil depends on cylinder position.
  3. Remove spark plug (if necessary).
    CAUTION: Do not shock spark plug.
scientia non olet · About LEMON Manuals