LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> NV2500 HD S >> Repair and Diagnosis >> External Pages >> Different car >> Section 488 (Engine Mechanical (5.6L)) >> Removal And Installation >> Fuel Injector And Fuel Tube >> Exploded View

Exploded View

WARNING: This page is about a different car, the 2019 Nissan NV3500 HD and 2019 Nissan NV2500 HD. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Fuel Injector And Fuel Tube Components With Torque Specifications
GNSAWBIA3364Z-364Courtesy of NISSAN NORTH AMERICA, INC.

1.

High pressure fuel pump

2.

Fuel feed tube (pump side)

3.

Fuel feed tube (bank side)

4.

Fuel rail (bank 2)

5.

Injector holder

6.

O-ring (blue)

7.

Backup ring

8.

Fuel injector

9.

Seal ring

10.

Insulator

11.

Fuel rail (bank 1)

12.

Gasket

13.

Fuel rail pressure sensor

14.

O-ring (black)

15.

Backup ring (brown)

16.

Backup ring (white)

A.

Refer to INSTALLATION

SYMBOL

Front

CAUTION:
  • Do not remove or disassemble parts unless instructed as shown in the figure.
  • Be sure to follow the tightening instruction to avoid fuel leaks.
NOTE: Replace both fuel feed tube (pump side) and fuel feed tube (bank side) simultaneously.