Removal Of Liquid Gasket Sealing

WARNING: This page is about a different car, the 2019 Nissan NV3500 HD and 2019 Nissan NV2500 HD. However, it is still accessible from the selected car via links, so may be relevant.

After removing the bolts and nuts, separate the mating surface and remove the liquid gasket using Tool (A).

Courtesy of NISSAN NORTH AMERICA, INC.

Tool number (A)

: KV10111100 (J-37228)

In areas where the cutter is difficult to use, use a plastic hammer to lightly tap (1) the cutter where the liquid gasket is applied. Use a plastic hammer to slide (2) the cutter by tapping on the side.

CAUTION: Do not damage the mating surfaces.