LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> NV2500 HD S >> Repair and Diagnosis >> External Pages >> Different car >> Section 487 (Engine Control System (VK56VD) DTC/Circuit Diagnosis (6 Of 6)) >> DTC/Circuit Diagnosis >> Information Display (ASCD) >> Component Function Check

Component Function Check

WARNING: This page is about a different car, the 2019 Nissan NV3500 HD and 2019 Nissan NV2500 HD. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK INFORMATION DISPLAY 
    1. Start engine.
    2. Press MAIN switch on ASCD steering switch.
    3. Drive the vehicle at more than 40 km/h (25 MPH).
      CAUTION: Always drive vehicle at a safe speed.
    4. Press SET/COAST switch.
    5. Check that the reading of the speedometer shows the same value as the set speed indicated in the information display while driving the vehicle on a flat road.

    Is the inspection result normal?

    YES

    INSPECTION END

    NO

    Go to Diagnosis Procedure .