LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> NV2500 HD S >> Repair and Diagnosis >> External Pages >> Different car >> Section 487 (Engine Control System (VK56VD) DTC/Circuit Diagnosis (6 Of 6)) >> DTC/Circuit Diagnosis >> DTC P26AB: Multi-Way Control Valve >> Component Inspection

Component Inspection

WARNING: This page is about a different car, the 2019 Nissan NV3500 HD and 2019 Nissan NV2500 HD. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK ENGINE COOLANT TEMPERATURE SENSOR 1 
    1. Turn ignition switch OFF.
    2. Disconnect engine coolant temperature sensor 1 harness connector.
    3. Remove engine coolant temperature sensor 1.
    4. Check resistance between engine coolant temperature sensor 1 terminals by heating with hot water as shown in the figure.
      G08855388Courtesy of NISSAN NORTH AMERICA, INC.

      Engine coolant temperature sensor 1

      Condition

      Resistance (kOhm)

      +

      -

      Terminal

      1

      2

      Temperature [ deg.C (deg.F)]

      20 (68)

      2.35 - 2.73

      50 (122)

      0.68 - 1.00

      90 (194)

      0.236 - 0.260

    Is the inspection result normal?

    YES

    INSPECTION END

    NO

    Replace engine coolant temperature sensor 1. Refer to Exploded View .