LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> NV2500 HD S >> Repair and Diagnosis >> External Pages >> Different car >> Section 487 (Engine Control System (VK56VD) DTC/Circuit Diagnosis (6 Of 6)) >> DTC/Circuit Diagnosis >> DTC P26A5: Multi-Way Control Valve Position Sensor >> DTC Description >> DTC Detection Logic

DTC Detection Logic

WARNING: This page is about a different car, the 2019 Nissan NV3500 HD and 2019 Nissan NV2500 HD. However, it is still accessible from the selected car via links, so may be relevant.

DTC

CONSULT screen terms

(Trouble diagnosis content)

DTC detection condition

P26A5

ENGINE COOLANT B/V A POSI SEN

(Engine coolant bypass valve A position sensor circuit range/performance)

Diagnosis condition

--

Signal (terminal)

--

Threshold

ECM detects the following status:

  • A voltage signal transmitted from the multi-way control valve position sensor is 4.76 V or more/4.3 V or less. Outside the above threshold when the valve is moved to the upper side stopper after ignition OFF
  • A voltage signal transmitted from the multi-way control valve position sensor is 0.8 V or more/0.34 or less. Outside the threshold when the valve is moved to the lower side stopper after engine start

Diagnosis delay time

10 seconds or more