LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> NV2500 HD S >> Repair and Diagnosis >> External Pages >> Different car >> Section 486 (Engine Control System (VK56VD) (2 Of 2)) >> Removal And Installation >> VVEL Control Module >> Removal and Installation >> Removal

Removal and Installation: Removal

WARNING: This page is about a different car, the 2019 Nissan NV3500 HD and 2019 Nissan NV2500 HD. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION: Additional service must be preformed when replacing VVEL control module. Refer to Description .
  1. Remove the air cleaner and air duct assembly. Refer to Removal and Installation .
  2. Disconnect the harness connector from the VVEL control module.
  3. Remove nuts and VVEL control module.
  4. Remove bolts and VVEL control module bracket (if necessary).
scientia non olet · About LEMON Manuals