LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> NV2500 HD S >> Repair and Diagnosis >> External Pages >> Different car >> Section 485 (Engine Control System (VK56VD) DTC/Circuit Diagnosis (1 Of 6)) >> DTC/Circuit Diagnosis >> DTC P0016: Intake Valve Timing Control >> DTC Description >> DTC Detection Logic

DTC Detection Logic

WARNING: This page is about a different car, the 2019 Nissan NV3500 HD and 2019 Nissan NV2500 HD. However, it is still accessible from the selected car via links, so may be relevant.

DTC No.

Trouble diagnosis

(Trouble diagnosis content)

Detecting condition

Possible cause

P0016

Crankshaft position B1 sensor A

(Crankshaft position - camshaft position correlation bank 1 sensor A)

Diagnosis condition

--

Signal (terminal)

Camshaft position sensor signal

Threshold

During the diagnosis of alignment of intake valve timing control, the angle difference between actual angle and target angle is 13 degrees or more

Diagnosis delay time

0.3 seconds or more