Diagnosis Procedure
WARNING: This page is about a different car, the 2019 Nissan NV3500 HD, 2019 Nissan NV2500 HD, and 2019 Nissan NV1500. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
The Signal Tech II Tool [- (J-50190)] can be used to perform the following functions. Refer to the Signal Tech II User Guide for additional information.
- Activate and display TPMS sensor IDs
- Display tire pressure reported by the TPMS sensor
- Read TPMS DTCs
- Register TPMS sensor IDs
- PERFORM SELF DIAGNOSTIC RESULT
Perform "Self Diagnostic Result".
Is DTC "U1000" detected?
YES
Malfunction in CAN communication system. Refer to Trouble Diagnosis Flow Chart .
NO
Check combination meter operation. Refer to System Description .