LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> NV2500 HD S >> Repair and Diagnosis >> External Pages >> Different car >> Section 476 (Engine Control System (DTC/Circuit Diagnosis) (3 Of 3)) >> DTC/Circuit Diagnosis >> Refrigerant Pressure Sensor >> Component Function Check

Component Function Check

WARNING: This page is about a different car, the 2019 Nissan NV3500 HD, 2019 Nissan NV2500 HD, and 2019 Nissan NV1500. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK REFRIGERANT PRESSURE SENSOR FUNCTION 
    1. Start engine and warm it up to normal operating temperature.
    2. Turn A/C switch and blower fan switch ON.
    3. Check the voltage between ECM harness connector terminals as per the following.

      ECM

      Voltage

      (Approx.)

      Connector

      +

      -

      Terminal

      F54

      20

      25

      1.0 - 4.0V

    Is the inspection result normal?

    YES

    INSPECTION END

    NO

    Proceed to DTC Diagnosis Procedure .