LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> NV2500 HD S >> Repair and Diagnosis >> External Pages >> Different car >> Section 476 (Engine Control System (DTC/Circuit Diagnosis) (3 Of 3)) >> DTC/Circuit Diagnosis >> Fuel Injector >> Component Function Check

Component Function Check

WARNING: This page is about a different car, the 2019 Nissan NV3500 HD, 2019 Nissan NV2500 HD, and 2019 Nissan NV1500. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSPECTION START 

    Turn ignition switch to START.

    Are any cylinders ignited?

    YES

    GO TO 2.

    NO

    Proceed to DTC Diagnosis Procedure .

  2. CHECK FUEL INJECTOR FUNCTION 

    SYMBOL With CONSULT

    1. Start engine.
    2. Perform "POWER BALANCE" in "ACTIVE TEST" mode of "ENGINE using CONSULT.
    3. Make sure that each circuit produces a momentary engine speed drop.

    SYMBOL Without CONSULT

    1. Start engine.
    2. Listen to each fuel injector operating sound.
      G04132840Courtesy of NISSAN NORTH AMERICA, INC.

      Clicking sound should be heard.

    Is the inspection result normal?

    YES

    INSPECTION END

    NO

    Proceed to DTC Diagnosis Procedure .