LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> NV2500 HD S >> Repair and Diagnosis >> External Pages >> Different car >> Section 476 (Engine Control System (DTC/Circuit Diagnosis) (3 Of 3)) >> DTC/Circuit Diagnosis >> DTC P0455: EVAP Control System >> Component Inspection >> Fuel Tank Vacuum Relief Valve (Built Into Fuel Filler Cap)

Fuel Tank Vacuum Relief Valve (Built Into Fuel Filler Cap)

WARNING: This page is about a different car, the 2019 Nissan NV3500 HD, 2019 Nissan NV2500 HD, and 2019 Nissan NV1500. However, it is still accessible from the selected car via links, so may be relevant.
  1. Wipe clean valve housing.
    G04073650Courtesy of NISSAN NORTH AMERICA, INC.
  2. Check valve opening pressure and vacuum.
    G04073651Courtesy of NISSAN NORTH AMERICA, INC.

    Pressure:

    15.3 - 20.0 kPa (0.156 - 0.204 kg/cm 2 , 2.22 - 2.90 psi)

    Vacuum:

    -6.0 to -3.3 kPa (-0.061 to -0.034 kg/cm 2 , -0.87 to -0.48 psi)

  3. If out of specification, replace fuel filler cap as an assembly.
CAUTION: Use only a genuine fuel filler cap as a replacement. If an incorrect fuel filler cap is used, the MIL may illuminate.