LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> NV2500 HD S >> Repair and Diagnosis >> External Pages >> Different car >> Section 476 (Engine Control System (DTC/Circuit Diagnosis) (3 Of 3)) >> DTC/Circuit Diagnosis >> Cooling Fan >> Component Inspection (Cooling Fan Motor)

Component Inspection (Cooling Fan Motor)

WARNING: This page is about a different car, the 2019 Nissan NV3500 HD, 2019 Nissan NV2500 HD, and 2019 Nissan NV1500. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK COOLING FAN MOTOR 
    1. Turn ignition switch OFF.
    2. Disconnect cooling fan motor harness connectors. Refer to Component Parts Location .
    3. Supply cooling fan motor terminals with battery voltage and check operation.

      Cooling fan motor terminals

      Cooling fan speed

      +

      -

      Terminal

      1

      2 and 4

      Low

      3

      1 and 3

      High

    Is the inspection result normal?

    YES

    INSPECTION END

    NO

    Replace cooling fan motor. Refer to Removal and Installation (Motor driven type) .