LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> NV2500 HD S >> Repair and Diagnosis >> External Pages >> Different car >> Section 476 (Engine Control System (DTC/Circuit Diagnosis) (3 Of 3)) >> DTC/Circuit Diagnosis >> Cooling Fan >> Component Function Check

Component Function Check

WARNING: This page is about a different car, the 2019 Nissan NV3500 HD, 2019 Nissan NV2500 HD, and 2019 Nissan NV1500. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK COOLING FAN FUNCTION 

    SYMBOL With CONSULT

    1. Turn ignition switch ON.
    2. Perform "COOLING FAN" in "ACTIVE TEST" mode of "ENGINE" using CONSULT.
    3. Touch "LOW" and "HI" on the CONSULT screen.
    4. Check that cooling fan operates.

    SYMBOL Without CONSULT

    1. Activate IPDM E/R auto active test and check cooling fan motor operation. Refer to Diagnosis Description .
    2. Check that cooling fan operates.

    Is the inspection result normal?

    YES

    INSPECTION END

    NO

    Proceed to Diagnosis Procedure .

scientia non olet · About LEMON Manuals