Removal and Installation: Removal
WARNING: This page is about a different car, the 2019 Nissan NV3500 HD, 2019 Nissan NV2500 HD, and 2019 Nissan NV1500. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
- Do not drop or strike yaw rate/side/decel G sensor, because it has little endurance to impact.
- Do not use a power tool.
- Remove instrument center finisher (LH). Refer to Exploded View .
- Remove the yaw rate/side/decel G sensor bolts.
- Reposition the yaw rate/side/decel G sensor to access the harness connector.
- Disconnect the harness connector from the yaw rate/side/decel G sensor.
- Remove the yaw rate/side/decel G sensor.