Removal and Installation: Installation

WARNING: This page is about a different car, the 2019 Nissan NV3500 HD, 2019 Nissan NV2500 HD, and 2019 Nissan NV1500. However, it is still accessible from the selected car via links, so may be relevant.

Installation is in the reverse order of removal.

Perform yaw rate/side/decel G sensor calibration when yaw rate/side/decel G sensor is removed, installed, disconnected or replaced. Refer to Description .

CAUTION:

Do not drop or strike yaw rate/side/decel G sensor, because it has little endurance to impact.
Do not use a power tool.