LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> NV2500 HD S >> Repair and Diagnosis >> External Pages >> Different car >> Section 473 (Meter, Warning Lamp & Indicator) >> Symptom Diagnosis >> The Ambient Temperature Display Is Incorrect >> Diagnosis Procedure

Diagnosis Procedure

WARNING: This page is about a different car, the 2019 Nissan NV3500 HD, 2019 Nissan NV2500 HD, and 2019 Nissan NV1500. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK COMBINATION METER INPUT SIGNAL 
    1. Select METER/M&A on CONSULT.
    2. Check OUTSIDE TEMP of DATA MONITOR.

    Does the ambient temperature approximately match the CONSULT display?

    YES

    Replace combination meter. Refer to Removal and Installation .

    NO

    GO TO 2.

  2. CHECK AMBIENT SENSOR SIGNAL CIRCUIT 

    Check the ambient sensor signal circuit. Refer to Diagnosis Procedure (Manual A/C) or Diagnosis Procedure (Auto A/C).

    Is the inspection result normal?

    YES

    GO TO 3.

    NO

    Repair harness or connector.

  3. CHECK AMBIENT SENSOR 

    Check the ambient sensor. Refer to Component Inspection (Manual A/C) or Component Inspection (Auto A/C).

    Is the inspection result normal?

    YES

    Replace combination meter. Refer to Removal and Installation .

    NO

    Replace ambient sensor. Refer to Removal and Installation (Manual A/C) or Removal and Installation (Auto A/C).