LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> NV2500 HD S >> Repair and Diagnosis >> External Pages >> Different car >> Section 473 (Meter, Warning Lamp & Indicator) >> Basic Inspection >> Diagnosis And Repair Workflow >> Work Flow >> Detailed Flow

Detailed Flow

WARNING: This page is about a different car, the 2019 Nissan NV3500 HD, 2019 Nissan NV2500 HD, and 2019 Nissan NV1500. However, it is still accessible from the selected car via links, so may be relevant.
  1. CONFIRM SYMPTOM 

    Confirm symptom or customer complaint.

    GO TO 2.

  2. SELF-DIAGNOSIS OF COMBINATION METER 

    Perform self-diagnosis of combination meter. Refer to Description .

    Is the inspection result normal?

    YES

    GO TO 3.

    NO

    If self-diagnosis will not start, check power supply and ground circuit of combination meter. Refer to Diagnosis Procedure . If power supply and ground circuits are OK, replace combination meter. Refer to Removal and Installation .

  3. CHECK COMBINATION METER WITH CONSULT 

    Select "METER/M&A" on CONSULT and perform self-diagnosis of combination meter. Refer to CONSULT Function (METER/M&A) .

    Is the inspection result normal?

    YES

    Check symptom. GO TO 4.

    NO

    Refer to DTC Index .

  4. CHECK SYSTEM OPERATION 

    Check the combination meter to verify that the repair has been completed successfully.

    Is the inspection result normal?

    YES

    Inspection End.

    NO

    GO TO 1.