LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> NV2500 HD S >> Repair and Diagnosis >> External Pages >> Different car >> Section 471 (Automatic Transmission (Re5R05A) (DTC/Circuit Diagnosis)) >> DTC/Circuit Diagnosis >> DTC U0100: Lost Communication (ECM A) >> DTC Confirmation Procedure

DTC Confirmation Procedure

WARNING: This page is about a different car, the 2019 Nissan NV3500 HD, 2019 Nissan NV2500 HD, and 2019 Nissan NV1500. However, it is still accessible from the selected car via links, so may be relevant.
  1. PREPARATION BEFORE WORK 

    If another "DTC CONFIRMATION PROCEDURE" occurs just before, turn ignition switch OFF and wait for at least 10 seconds, then perform the next test.

    GO TO 2.

  2. PERFORM DTC CONFIRMATION PROCEDURE 

    SYMBOL With CONSULT

    1. Start the engine and wait for at least 5 seconds.
    2. Check DTC.

    SYMBOL With GST

    Follow the procedure "With CONSULT".

    Is "U0100" detected?

    YES

    Go to Diagnosis Procedure .

    NO

    INSPECTION END

scientia non olet · About LEMON Manuals