DTC Confirmation Procedure
WARNING: This page is about a different car, the 2019 Nissan NV3500 HD, 2019 Nissan NV2500 HD, and 2019 Nissan NV1500. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
Always drive vehicle at a safe speed.
- PRECONDITIONING
If DTC CONFIRMATION PROCEDURE is previously conducted, always turn ignition switch OFF and wait at least 10 seconds before performing the next test.
GO TO 2.
- CHECK DTC DETECTION
With CONSULT
- Turn ignition switch ON.
- Select "VHCL/S SE-A/T" in "Data Monitor" in "TRANSMISSION".
- Start the engine and maintain the following condition for 10 seconds or more.
VHCL/S SE-A/T
: 10 km/h (6 MPH) or more
With GST
Follow the procedure "With CONSULT".
Is "P0712" (With CONSULT) or "P0710" (With GST) detected?
YES
Go to DTC Diagnosis Procedure .
NO
INSPECTION END