CONSULT Function (HVAC): Notes
WARNING: This page is about a different car, the 2018 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
After disconnecting the CONSULT vehicle interface (VI) from the data link connector, the ignition must be cycled OFF - ON (for at least 5 seconds) - OFF. If this step is not performed, the BCM may not go to "sleep mode", potentially causing a discharged battery and no-start condition.
CONSULT can display each diagnosis item using the diagnosis test modes as shown, below.
CONSULT Application Items
|
Diagnosis Mode |
Description |
|
Self Diagnostic Result |
Displays the diagnosis results judged by A/C auto amp. |
|
Data Monitor |
Displays A/C auto amp. input/output data in real time. |
|
Work support |
Changes the setting for each system function. |
|
Active Test |
The signals used to activate each device are forcibly supplied from A/C auto amp. |
|
ECU Identification |
Displays the A/C auto amp. number. |
|
Configuration |
|