Active Test
WARNING: This page is about a different car, the 2018 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
|
Test item |
Description |
|
HVAC TEST |
The operation check of A/C system can be performed by selecting the mode. Refer to the following table for the conditions of each mode. |
HVAC TEST
|
Test item |
|||||||
|
MODE 1 |
MODE 2 |
MODE 3 |
MODE 4 |
MODE 5 |
MODE 6 |
MODE 7 |
|
|
Mode door position |
VENT |
VENT |
B/L |
D/F1 |
D/F2 |
DEF |
DEF |
|
Intake door position |
REC |
REC |
20%FRE |
FRE |
FRE |
FRE |
FRE |
|
Air mix door position |
FULL COLD |
FULL COLD |
FULL COLD |
FULL HOT |
FULL HOT |
FULL HOT |
FULL HOT |
|
Blower motor duty ratio |
30% |
30% |
60% |
HI |
HI |
60% |
HI |
|
Magnet clutch |
ON |
ON |
ON |
OFF |
OFF |
ON |
ON |
|
ECV duty |
100% |
100% |
50% |
0% |
0% |
100% |
100% |
NOTE:
Perform the inspection of each output device after starting the engine, because the A/C compressor has been operating.