LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> NV2500 HD S >> Repair and Diagnosis >> External Pages >> Different car >> Section 469 (Power Supply, Ground & Circuit Elements) >> Removal And Installation >> Battery Terminal With Fusible Link >> Removal and Installation >> Installation

Removal and Installation: Installation

WARNING: This page is about a different car, the 2019 Nissan NV3500 HD, 2019 Nissan NV2500 HD, and 2019 Nissan NV1500. However, it is still accessible from the selected car via links, so may be relevant.

Installation is in the reverse order of removal.

CAUTION: Replace the fusible link box (battery) if it has been dropped or sustained and impact.

To install the battery, carefully read the following instructions:

  • To prevent damage to the parts, connect the battery cable to the positive terminal first.
  • After connecting battery cables, to securely supply battery voltage, ensure that they are tightly clamped to battery terminals for good contact.
  • To securely supply battery voltage, check battery terminal for poor connection caused by corrosion.

Reset electronic systems as necessary. Refer to Special Repair Requirement .