Mid Sun Gear, Rear Sun Gear, High And Low Reverse Clutch Hub: Disassembly

WARNING: This page is about a different car, the 2019 Nissan NV3500 HD, 2019 Nissan NV2500 HD, and 2019 Nissan NV1500. However, it is still accessible from the selected car via links, so may be relevant.

Remove needle bearing and bearing race from high and low reverse clutch hub.

Courtesy of NISSAN NORTH AMERICA, INC.
Remove snap ring from mid sun gear assembly with pair of snap ring pliers.

Courtesy of NISSAN NORTH AMERICA, INC.

CAUTION: Never expand snap ring excessively.
Remove high and low reverse clutch hub from mid sun gear assembly.

Courtesy of NISSAN NORTH AMERICA, INC.
Remove needle bearing from high and low reverse clutch hub.

Courtesy of NISSAN NORTH AMERICA, INC.
Remove rear sun gear assembly from mid sun gear assembly.

Courtesy of NISSAN NORTH AMERICA, INC.
Remove snap ring from rear sun gear with a flat-bladed screwdriver.

Courtesy of NISSAN NORTH AMERICA, INC.
Remove 1st one-way clutch from rear sun gear.

Courtesy of NISSAN NORTH AMERICA, INC.
Remove seal rings from mid sun gear.

Courtesy of NISSAN NORTH AMERICA, INC.

CAUTION: Do not reuse seal rings.