LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> NV2500 HD S >> Repair and Diagnosis >> External Pages >> Different car >> Section 466 (Automatic Transmission (Re5R05A)) >> Unit Disassembly And Assembly >> Front Carrier, Input Clutch, Rear Internal Gear >> Disassembly

Front Carrier, Input Clutch, Rear Internal Gear: Disassembly

WARNING: This page is about a different car, the 2019 Nissan NV3500 HD, 2019 Nissan NV2500 HD, and 2019 Nissan NV1500. However, it is still accessible from the selected car via links, so may be relevant.
  1. Compress snap ring with two flat-bladed screwdrivers.
    G04075863Courtesy of NISSAN NORTH AMERICA, INC.
  2. Remove front carrier assembly and input clutch assembly from rear internal gear.
  3. Remove front carrier assembly from input clutch assembly.
  4. Remove bearing race from front carrier assembly.
    G04075864Courtesy of NISSAN NORTH AMERICA, INC.
  5. Remove needle bearing from front carrier assembly.
    G04075865Courtesy of NISSAN NORTH AMERICA, INC.
  6. Remove snap ring from front carrier assembly.
    G04075866Courtesy of NISSAN NORTH AMERICA, INC.
    CAUTION: Never expand snap ring excessively.
  7. Remove O-ring and seal rings from input clutch assembly.
    G04075867Courtesy of NISSAN NORTH AMERICA, INC.
    CAUTION: Do not reuse O-ring or seal rings.
  8. Remove needle bearing from input clutch assembly.
    G04075868Courtesy of NISSAN NORTH AMERICA, INC.
  9. Remove snap ring from input clutch drum with a flat-bladed screwdriver.
    G04075869Courtesy of NISSAN NORTH AMERICA, INC.
  10. Remove drive plates, driven plates, dish plate and retaining plate from input clutch drum.
scientia non olet · About LEMON Manuals