LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> NV2500 HD S >> Repair and Diagnosis >> External Pages >> Different car >> Section 466 (Automatic Transmission (Re5R05A)) >> Removal And Installation >> Key Interlock Cable >> Removal and Installation >> Installation

Removal and Installation: Installation

WARNING: This page is about a different car, the 2019 Nissan NV3500 HD, 2019 Nissan NV2500 HD, and 2019 Nissan NV1500. However, it is still accessible from the selected car via links, so may be relevant.
  1. Connect the key interlock cable to steering column and key interlock cable bracket.
  2. Install key interlock cable to steering lock unit.
    CAUTION:
    • Install key interlock cable in such a way that it will not be damaged by sharp bends, twists or interference with adjacent parts.
    • After installing key interlock cable to A/T shift selector, make sure that casing cap and bracket are firmly secured in their positions. If casing cap can be removed with an external load of less than 39 N (4.0 kg-f, 8.8 lb-f), replace key interlock cable with new one.
  3. Install steering column covers. Refer to Removal and Installation .
  4. Install instrument lower panel LH. Refer to Removal and Installation .