LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> NV2500 HD S >> Repair and Diagnosis >> External Pages >> Different car >> Section 466 (Automatic Transmission (Re5R05A)) >> Precaution >> Precautions >> Service Notice or Precautions >> Checking And Changing A/T Fluid Service

Checking And Changing A/T Fluid Service

WARNING: This page is about a different car, the 2019 Nissan NV3500 HD, 2019 Nissan NV2500 HD, and 2019 Nissan NV1500. However, it is still accessible from the selected car via links, so may be relevant.

Increase ATF temperature by 80 deg.C (176 deg.F) once, and then check ATF level in 65 deg.C (149 deg.F) when adjusting ATF level.

NOTE: JA60 uses both systems of a water-cooling and of an air-cooling. Air-cooling system has a by-pass valve. When ATF temperature is not over 50 deg.C (122 deg.F) with water-cooling system OFF, it does not flow to air-cooling system. If ATF level is set without the flow of ATF, the level will be 10mm lower than the standard. Therefore, piping should be filled with ATF when adjusting level.
scientia non olet · About LEMON Manuals