LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> NV2500 HD S >> Repair and Diagnosis >> External Pages >> Different car >> Section 466 (Automatic Transmission (Re5R05A)) >> Basic Inspection >> Road Test >> Check At Idle

Check At Idle

WARNING: This page is about a different car, the 2019 Nissan NV3500 HD, 2019 Nissan NV2500 HD, and 2019 Nissan NV1500. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK STARTING THE ENGINE 
    1. Park vehicle on level surface.
    2. Move selector lever to "P" or "N" position.
    3. Turn ignition switch to "OFF" position.
    4. Turn ignition switch to "START" position.

    Does the engine start?

    YES

    GO TO 2.

    NO

    Stop the road test and go to Symptom Table .

  2. CHECK STARTING THE ENGINE 
    1. Turn ignition switch to "ON" position.
    2. Move selector lever in "D","4", "3", "2", "1" or "R" position.
    3. Turn ignition switch to "START" position.

    Does the engine start in either position?

    YES

    Stop the road test and go to Symptom Table .

    NO

    GO TO 3.

  3. CHECK "P" POSITION FUNCTIONS 
    1. Move selector lever to "P" position.
    2. Turn ignition switch to "OFF" position.
    3. Release the parking brake.
    4. Push the vehicle forward or backward.
    5. Engage the parking brake.

    When you push the vehicle with disengaging the parking brake, does it move?

    YES

    Record the malfunction, GO TO 4.

    NO

    GO TO 4.

  4. CHECK "N" POSITION FUNCTIONS 
    1. Start the engine.
    2. Move selector lever to "N" position.
    3. Release the parking brake.

    Does vehicle move forward or backward?

    YES

    Record the malfunction, GO TO 5.

    NO

    GO TO 5.

  5. CHECK SHIFT SHOCK 
    1. Engage the brake.
    2. Move selector lever to "D" position.

    When the transmission is shifted from "N" to "D", is there an excessive shock?

    YES

    Record the malfunction, GO TO 6.

    NO

    GO TO 6.

  6. CHECK "R" POSITION FUNCTIONS 
    1. Engage the brake.
    2. Move selector lever to "R" position.
    3. Release the brake for 4 to 5 seconds.

    Does the vehicle creep backward?

    YES

    GO TO 7.

    NO

    Record the malfunction, GO TO 7.

  7. CHECK "D" POSITION FUNCTIONS 

    Inspect whether the vehicle creeps forward when the transmission is put into the "D" position.

    Does the vehicle creep forward in the "D" positions?

    YES

    Go to Cruise Test - Part 1 .

    NO

    Record the malfunction and go to Cruise Test - Part 1 .