LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> NV2500 HD S >> Repair and Diagnosis >> External Pages >> Different car >> Section 465 (SRS Airbag) >> Removal And Installation >> Diagnosis Sensor Unit >> Removal and Installation >> Notes

Removal and Installation: Notes

WARNING: This page is about a different car, the 2019 Nissan NV3500 HD, 2019 Nissan NV2500 HD, and 2019 Nissan NV1500. However, it is still accessible from the selected car via links, so may be relevant.
WARNING:
  • Before servicing the SRS, turn the ignition switch OFF, disconnect both battery terminals and wait at least three minutes.
  • Always work from the side of air bag module. Do not work in front of it.
  • Do not use air tools or electric tools for servicing.
CAUTION:
  • Check diagnosis sensor unit bracket to make sure it is free of deformities, dents, cracks or rust. If it shows any visible signs of damage, replace it with new one.
  • Do not disassemble diagnosis sensor unit.
  • When replacing the air bag diagnosis sensor unit, always check with the parts department for the latest parts information. Installing an incorrect air bag diagnosis sensor unit may or may not cause the air bag warning lamp to illuminate and may cause incorrect deployment of the supplemental air bags and seat belt pre-tensioner in a collision resulting in serious personal injury or death.