Component Inspection
WARNING: This page is about a different car, the 2019 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.
- CHECK TILT SWITCH
- Turn ignition switch OFF.
- Disconnect ADP steering switch (tilt switch).
- Check continuity between ADP steering switch terminals.
ADP steering switch (tilt switch)
Condition
Continuity
Terminal
3
5
Tilt switch (upward)
Operate
Yes
Release
No
2
Tilt switch (downward)
Operate
Yes
Release
No
Is the inspection result normal?
YES
Inspection End.
NO
Replace ADP steering switch (tilt switch). Refer to Removal and Installation .