Component Function Check
WARNING: This page is about a different car, the 2019 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.
- CHECK FUNCTION
- Select "TILT PULSE" in "DATA MONITOR" mode with CONSULT.
- Check tilt sensor signal under the following conditions.
Monitor item
Condition
Value
TILT PULSE
Steering column
Operate (upward)
Change (decrease)
Operate (downward)
Change (increase)
Release
No change
Is the inspection result normal?
YES
Inspection End.
NO
Perform diagnosis procedure. Refer to Diagnosis Procedure .