Component Function Check

WARNING: This page is about a different car, the 2019 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.

CHECK FUNCTION

Select "TELESCO PULSE" in "DATA MONITOR" mode with CONSULT.
Check telescopic sensor signal under the following conditions.

Monitor item	Condition		Valve
TELESCO PULSE	Steering column	Operate (forward)	Change (decrease)
		Operate (backward)	Change (increase)
		Release	No change

Is the inspection result normal?

YES

Inspection End.

Perform diagnosis procedure. Refer to Diagnosis Procedure .