Component Function Check
WARNING: This page is about a different car, the 2019 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.
- CHECK FUNCTION
- Select "LIFT FR PULSE" in "DATA MONITOR" mode with CONSULT.
- Check the lifting sensor (front) signal under the following conditions.
Monitor item
Condition
Value
LIFT FR PULSE
Seat lifting (front)
Operate (upward)
Change (decrease)
Operate (downward)
Change (increase)
Release
No change
Is the inspection result normal?
YES
Inspection End.
NO
Perform diagnosis procedure. Refer to Diagnosis Procedure .