LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> NV2500 HD S >> Repair and Diagnosis >> External Pages >> Different car >> Section 46 (Automatic Transaxle (2 Of 2)) >> Removal And Installation >> Input Speed Sensor >> Removal and Installation >> Removal

Removal and Installation: Removal

WARNING: This page is about a different car, the 2018 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the battery tray and bracket. Refer to Removal and Installation (Battery Tray) .
  2. Remove the starter motor. Refer to Removal and Installation .
  3. Disconnect the harness connector from the input speed sensor (1).
    GNSDB114060Courtesy of NISSAN NORTH AMERICA, INC.
  4. Remove the input speed sensor bolt, then the input speed sensor (1).
  5. Remove the O-ring (2) from the input speed sensor (1).
    CAUTION: Do not reuse O-ring.
scientia non olet · About LEMON Manuals