LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> NV2500 HD S >> Repair and Diagnosis >> External Pages >> Different car >> Section 453 (Sunroof) >> Basic Inspection >> Inspection And Adjustment >> Special Repair Requirement >> Anti-Pinch Function

Anti-Pinch Function

WARNING: This page is about a different car, the 2019 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.

Moonroof 

  1. Fully open the moonroof to the full open position.
  2. Place a piece of wood at the fully closed position.
  3. Close the moonroof completely with auto-slide close function.
  4. Moonroof should make contact and then tilt up or travel in reverse for 200mm (7.87 in.).

Sunshade 

  1. Open the sunshade to the full open position.
  2. Place a piece of wood at the fully closed position.
  3. Close the sunshade completely with auto-slide close function.
  4. Sunshade should make contact and then travel in reverse for 100mm (3.94 in.).
CAUTION:
  • Do not test the anti-pinch function with your hands or other body parts because they may be pinched.
  • Depending on the environment and driving conditions, if a similar impact or load is applied to the moonroof it may lower.
  • Test the auto-slide operation before inspection when the initialization procedure is performed.
  • Perform the initialization procedure when the auto-slide operation or anti-pinch function does not operate normally.
scientia non olet · About LEMON Manuals