Component Inspection

WARNING: This page is about a different car, the 2019 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.

Drive mode select switch inspection

Turn ignition switch OFF.
Disconnect drive mode select switch connector.

Check continuity between drive mode select switch connector terminal 6 and drive mode select switch connector terminals 1, 2, 3 and 4.

Drive mode select switch		Switch position	Continuity
Terminals
6	1	SNOW	Existed
	2	ECO
	3	STANDARD
	4	SPORT

Is the inspection result normal?

YES

Inspection End.

Replace drive mode select switch. Refer to Removal and Installation .