Component Inspection

WARNING: This page is about a different car, the 2019 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.

CHECK SEAT BELT BUCKLE SWITCH LH

Turn ignition switch OFF.
Disconnect seat belt buckle switch LH harness connector.

Check continuity between seat belt buckle switch LH terminals.

Seat belt buckle switch LH		Condition	Continuity
Terminal
3	4	Seat belt buckle LH is fastened	No
		Seat belt buckle LH is not fastened	Yes
	2	Seat belt buckle LH is fastened	Yes
		Seat belt buckle LH is not fastened	No

Is the inspection result normal?

YES

Inspection End.

Replace seat belt buckle switch LH. Refer to Removal and Installation .