Component Parts Inspection
WARNING: This page is about a different car, the 2019 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.
- CHECK BRAKE PEDAL STROKE SENSOR
- Turn ignition switch OFF.
- Disconnect brake pedal stroke sensor connector.
- Check resistance between brake pedal stroke sensor terminal as per the following.
Brake pedal stroke sensor
Condition
Resistance (kOhm)
(Approx.)
Terminal
2
1
Brake released -> depressed
0.2 -> 1.0
3
1.0 -> 0.2
Is the inspection result normal?
YES
Inspection End.
NO
Replace brake pedal stroke sensor. Refer to Removal and Installation .