LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> NV2500 HD S >> Repair and Diagnosis >> External Pages >> Different car >> Section 448 (Seat Belt Control System) >> Removal And Installation >> Brake Pedal Stroke Sensor >> Removal and Installation >> Installation

Removal and Installation: Installation

WARNING: This page is about a different car, the 2019 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.

Installation is in the reverse order of removal.

CAUTION:
  1. Align brake pedal stroke sensor lever with the slot in brake pedal sensor bracket, or damage may occur.
  2. Confirm output voltage of brake pedal stroke signal 1 and 2 using CONSULT. Refer to Reference Value .
NOTE: After installation, press the brake pedal approximately 10 mm to break the stroke sensor pin.
scientia non olet · About LEMON Manuals