Component Function Check
WARNING: This page is about a different car, the 2019 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.
- CHECK FUNCTION
- Select DOOR LOCK of BCM using CONSULT.
- Select KEY CYL LK-SW, KEY CYL UN-SW in DATA MONITOR mode.
- Check that the function operates normally according to the following conditions.
Monitor item
Condition
Status
KEY CYL LK-SW
Driver side door key cylinder
Lock
ON
Neutral / Unlock
OFF
KEY CYL UN-SW
Unlock
ON
Neutral / Lock
OFF
Is the inspection result normal?
YES
Door key cylinder switch is OK.
NO
Refer to Diagnosis Procedure .