LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> NV2500 HD S >> Repair and Diagnosis >> External Pages >> Different car >> Section 444 (Can Gateway (DTC/Circuit Diagnosis)) >> DTC/Circuit Diagnosis >> DTC U1010-49: Control Unit (Can) >> Diagnosis Procedure

Diagnosis Procedure

WARNING: This page is about a different car, the 2019 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.
  1. PERFORM DTC CONFIRMATION PROCEDURE AGAIN 
    1. Turn ignition switch ON.
    2. Erase DTC.
    3. Perform DTC confirmation procedure again. Refer to DTC Description .
    4. Check DTC.

    Is DTC U1010-49 displayed?

    YES

    Replace 3CH CAN gateway.

    NO

    INSPECTION END

scientia non olet · About LEMON Manuals