LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> NV2500 HD S >> Repair and Diagnosis >> External Pages >> Different car >> Section 444 (Can Gateway (DTC/Circuit Diagnosis)) >> DTC/Circuit Diagnosis >> DTC B2600-46: CONFIG Error >> DTC Description >> DTC Confirmation Procedure

DTC Confirmation Procedure

WARNING: This page is about a different car, the 2019 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.
  1. PERFORM DTC CONFIRMATION PROCEDURE 

    SYMBOL With CONSULT

    1. Turn ignition switch ON and wait at least 2 seconds or more.
    2. Select "Self Diagnostic Result" mode of "3ch CAN GATEWAY" using CONSULT.
    3. Check DTC.

    Is DTC B2600-46 detected?

    YES

    Proceed to Diagnosis Procedure .

    NO

    To check malfunction symptom before repair: Intermittent Incident .

    NO

    Confirmation after repair: INSPECTION END

scientia non olet · About LEMON Manuals